Skip to content

Free roof inspection, and you see every finding yourself: (317) 961-3289

New Palestine · Cumberland · Greenfield · Lawrence

(317) 961-3289
Roofer in a yellow safety harness kneeling on gray underlayment, fastening a dark standing-seam metal panel on a house roof, with a ladder at the eave and a brick chimney

ServicesMetal Roofing

Metal Roofing in New Palestine

We install standing seam and screw-down steel roofs, and we photograph the deck, the underlayment and the finished panels so you can see what went into your roof. It starts with a free roof inspection and an honest answer on whether metal fits your home.

When a metal roof is the right call

A metal roof costs more up front than shingles, and it isn't the answer for every house. It makes sense when you plan to stay a long time, when you're tired of patching shingles after hail or wind, or when you want a roof that sheds snow and stands up to years of freezing and thawing. If metal doesn't suit your budget or your roof's shape, we'll say so and walk you through shingle roofing instead.

What separates a quiet, dry metal roof from a noisy, leaky one is mostly hidden: a flat, sound deck, the right underlayment, panels that are free to expand and contract, and careful trim at every wall and valley. You never see those parts once the job is done, so we document them as we go and hand you that record along with the finished shots.

What a metal roof from us includes

Standing seam or exposed-fastener panels

Standing seam panels hide their fasteners under raised seams and ride on clips that let the steel move with temperature. Exposed-fastener panels screw straight through and cost less, which suits garages, porches and outbuildings. We bring samples of both and explain where each one belongs.

Deck check before panels go down

After tear-off we inspect every sheet of decking and replace wood that is soft or rotted. You get photos of what we found and what we replaced, so any added cost is never a mystery.

Ice barrier and underlayment

A self-adhering ice and water barrier goes along the eaves, in the valleys and around penetrations, with synthetic underlayment over the rest. Under metal, this layer is your backup against wind-driven rain and ice dams.

Trim, flashing and pipe boots

Ridge caps, eave and rake trim, wall flashing and boots made for metal panels around vents and plumbing stacks. Most metal roof leaks start at these spots, so they get our closest attention.

Snow guards where they matter

Snow slides off steel in sheets. We recommend guards above entry doors, walkways and decks, and over gutters that would otherwise take the hit.

Cleanup and a full job record

We run magnetic sweepers across the yard and driveway for screws and scraps. You keep a complete set of before, during and after pictures for your files.

Signs metal may be worth a look

  • Shingles that keep needing repairs

    If the same slope has been fixed twice, or your shingles are curling, cracking or dropping granules into the gutters, you may be paying for a roof twice. A free inspection tells you whether a repair still makes sense.

  • Storm damage every few years

    Homes that keep getting hit by hail or wind often do better with heavier-gauge steel. Ask about impact-rated panels if hail is your main worry.

  • Ice dams along the eaves

    Metal sheds snow faster than shingles. Paired with good attic ventilation, it can cut down on ice building up at the roof edge.

  • An older metal roof with loose screws or rust

    Exposed-fastener roofs depend on rubber washers that dry out and crack over time. Rust streaks, backed-out screws or drips along panel laps point to roof repair or a new metal roof.

  • You plan to stay put

    Metal earns back its higher cost over the years. If you expect to sell soon, we'll tell you plainly that shingles may be the better value.

How a metal roof job runs

  1. 1

    Free inspection and honest options

    We walk the roof and check the attic, note what we see and sit down with you to compare metal and shingles for your house. You get a written, line-item estimate to look over at your own pace.

  2. 2

    Measuring and ordering panels

    Metal panels are usually cut to length for each slope, so we measure carefully before ordering. That means some lead time between signing and the start date, and we'll give you a realistic window.

  3. 3

    Tear-off and a close look at the deck

    We tarp shrubs and flower beds, remove the old roof and photograph the bare deck before fixing any soft spots. Anything beyond the estimate gets your okay first.

  4. 4

    Underlayment, panels and trim

    Ice barrier and underlayment go down, then panels, flashing, pipe boots and ridge cap. Each layer gets documented before the next one covers it.

  5. 5

    Walkthrough and cleanup

    We sweep the yard with magnets, walk the finished roof with you and send over the full record of the work for your files.

What moves the price of a metal roof

Every metal roof we price comes from the inspection, never a guess over the phone. Your written estimate lists materials, labor, deck repairs and permits on separate lines, so nothing is lumped together. We also offer financing for homeowners who want to pay over time.

Panel type and gauge
Standing seam with concealed clips costs more than exposed-fastener panels, and thicker steel costs more than thinner. Paint finishes vary too, and higher-grade coatings hold their color longer in summer sun.
Roof shape
Valleys, dormers, skylights and chimneys each need trim and flashing bent to fit. A simple gable roof goes faster than a cut-up roof of the same size.
Tear-off and deck condition
Removing one or more layers of shingles adds labor and disposal. Rotted decking found underneath adds material, which is why we show it to you before replacing anything.
Pitch and access
Steep slopes need extra safety setup and slow the crew down. A tight lot or a long carry from the driveway adds time as well.
Add-ons you choose
Snow guards, gutters sized for the faster runoff from metal, and added attic ventilation show up as separate line items, so you decide what to include.

What homeowners ask before choosing metal

Something not covered here? (317) 961-3289

Will rain sound louder on a steel roof?

In most homes, it sounds about the same as rain on asphalt shingles. Your panels sit on a solid wood deck with underlayment beneath them, and those layers soak up most of the drumming before it reaches the attic. The loud ping people remember usually comes from barns and sheds, where bare steel rests on open rafters.

Can the panels go right over my current shingles?

In some cases, depending on how your roof is holding up and what local code allows, and we'll let you know if that's possible. Most of the time we suggest tearing off first, since that's the only way to see the deck and photograph it. Laying new steel over soft wood just buys the problem a little time.

Does hail leave dents in metal?

Big hailstones can leave cosmetic dents, more so on thinner panels, but a dent seldom lets water in the way a cracked shingle can. Thicker gauges and impact-rated panels hold up better against denting. When a storm does hurt your roof, we work with homeowners and insurance companies on storm damage claims, and our Storm Damage Repair page walks through the steps.

What does oil canning mean?

Oil canning is a faint ripple that can show up in the flat parts of standing seam panels, usually when the sun is low early or late in the day. It's a looks issue only and has no effect on how water runs off. Panels with light ribs stamped into the flats keep it mostly hidden, and we bring samples so you can see the difference in person.

Will my gutters need replacing too?

Not necessarily. Because rain and snow leave a metal roof faster, we check that your gutters are big enough and fastened securely enough to take the extra load, and we recommend snow guards so sliding snow doesn't tear them off. If yours aren't up to it, our Gutters page explains that work.

See what's under your roof first

A free roof inspection gets you photos of your roof's current condition and a straight answer on whether metal is worth it for your home. No pressure either way.